1 / 4
Headphone stand (Omega style)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replica of the headphone Omega Sieveking
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 303
- Wydruki
- 3
- Wyświetlenia
- 940
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 3) (Komentarze: 10)Remiksy (0)Kolekcje (40)Powiązane
A replica of the Omega Sieveking headphone stand.
The size is 25cm, so there is splitted version if you can't print it at once (this is my case). You need to glue the tube inside all parts. Tubes are a little bit smaller that the holes (1.96mm*11mm VS 2mm*12mm).
Recommended:
- infill no less than 10% gyroid
- 0.20 mm
- no support
It will take ~10h of printing.