1 / 2
[Gridfinity 2x1] Bin for ON-FW50 Charger & Lens Cleaning Pen — zdjęcie 1
1 / 2

[Gridfinity 2x1] Bin for ON-FW50 Charger & Lens Cleaning Pen

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple Gridfinity bin that fits the aftermarket charger "ON-FW50" for Sony NP-FW50 batteries and a lens cleaning pen.

Ocena
0 / 5
Polubienia
3
Pobrania
17
Wydruki
0
Wyświetlenia
190
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Public Domain

Print time ~25 Minutes
Filament ~30 Grams

F3D File included, if you want to customise it a bit more

Print Settings (Ankermake M5C)

Nozzle 0.6mm
Filament PLA+
Layer Height 0.40mm
Layer Width 0.62mm
Perimeters 2
Top / Bottom Solid Layers 2
Seam Position Aligned
Infill 10% Rectilinear

You might need supports. (depends on your nozzle, material & printer).

If that is the case, use an overhang threshold of 50 and auto-generate the supports. This way, you get a nice and clean bracket for your Gridfinity Grid.

Tagi