1 / 4
Axiom CNC Dust Collection Hose Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the hose to keep the pressure off of the router bit while it's operating.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this for a friend who was having issues with their dust collection hose putting pressure on his CNC bit, causing it to skew it slightly when operating.
Bolt holes will have to be drilled into the Axiom sheet metal cover in order to mount.
This can be easily done.
Print the "bolt" horizontally, with support.
The latches for the "swing door" may break off eventually, just as my friend's did, but I feel like he may have been a little rough with it.
I will try to update the latches to a better design later.