Reservoir to toilet connection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connect reservoir with the toilet
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Connect reservoir with the toilet. PETG or ASA may be better, but in white I have PLA now. Print straight pipe as many times as needed. Supports needed only for Elbow90.stl. All parts printed with brim.
Update 20240201: added Elbow90_V2 for 50mm sealing on reservoir side.
Update 20240203: added Elbow90_V3 - shorter version, smaller sealing on reservoir side, added sealing between pipe parts (printed from flex at 0,2mm layer)
Update 20240205: This version is not as good as I expected, I am working on a new version that should be much better. I need a few days to properly test the new version.
Update 20240220: New (better) version published here.