1 / 4
PETG wingroots and PLA body for voroni dragonfly
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I cut the dragonfly body in two parts. PETG wingroots and PLA body.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 129
- Wydruki
- 2
- Wyświetlenia
- 872
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (0)Kolekcje (19)Powiązane
I cut the dragonfly body in two parts. Now I printed the wing roots in clear PETG like the wings, and the body in 3 colored PLA. I geot the looks of the PLA and the funktion of the PETG for the wings.
printed with 0,15 mm layer and 0,4 mm nozzle. Depending on the printer you might need to play around with some tools for the cone fit.
After the parts fit i clued them together.