135 Film Case - 3x & 5x Versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made these 135 film cases and thought I'd share them.
- Ocena
- 4,75 / 5
- Polubienia
- 114
- Pobrania
- 919
- Wydruki
- 9
- Wyświetlenia
- 2601
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I made these 135 film cases and thought I'd share them.
Just like my medium format (120) film cases, these come also as a 3 and 5 roll size option. The lid is symmetrical so it fits in either orientation and the registration pins hold it in place.
Print these with 2 outer perimeters (0.4mm nozzle, print width set to 0.45mm) and 20-30% infill. For the lid I recommend activating the "detect thin walls" (in Prusa Slicer) or whatever the equivalent is in your slicer, so the thin walls of the lid are printed with just one single extrustion line in the center instead of two lines very close to each other. Otherwise you will get a very noticable step/bulge where the thin wall starts printing.
Enjoy and if you like the result, please share a make photo.
Print Settings
Printer Brand:
Printer: Creality CR-10S
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20-30%
Filament: Prusament PLA MysticGreen & GalaxyBlack