The 12-cent Mini Spinner (yet ANOTHER fidget toy, using 625ZZ bearing and US pennies)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
And here is yet ANOTHER fidget spinner.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 759
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
And here is yet ANOTHER fidget spinner.
This time, I've made it use US pennies at the ends, and like the other one, a 625ZZ bearing in the middle.
Like the other one, the ends have a "windowed" design, with snap-in retaining rings to hold the coins and bearing.
You MAY need to tap the pennies in lightly with hammer, and you'll need to use superglue to affix the retaining rings and center caps (you need two).
Your printer needs to be well-calibrated to print this, but I tried to leave a little bit of leeway in case of bad seams.
Print instructions
Licence: Creative Commons - Attribution - Non-Commercial - Share Alike Category: Mechanical Toys