Adjustable BL-Touch sensor mount for Artillery Hornet - V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Artillery Hornet BL Touch Mount
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 712
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Artillery Hornet BL Touch Mount
Introducing my latest BL Touch mount tailored for the Artillery Hornet. This meticulously crafted design, constructed to be compatible with this Artillery Hornet Fan Duct.
Required Configuration & BL Touch
Configuration Files:
In the following link, You must be able to find both the configuration.h and configuration_adv.h files I have used to compile the Marlin 2.1.x version for my Artillery Hornet.
In this files, you should see the current the required configuration for NOZZLE_TO_PROBE_OFFSET, my current values are:
{ 30, -32, -0.2 }
BL Touch:
The sensor came with the following cable color distribution, at least the one I have bought, This one.
- GND (Brown)
- VCC (Red)
- Servo PWM (Yellow)
- GND (Black)
- Sense (White)
So, in order to connect this BL Touch to our Artillery Hornet 3D printer, you must connect it in the following order into the Hornet Z Probe Connector:
- (Brown) -
- (Red) +
- (White) P
- (Black) -
- (Yellow) S
Having said that, you MUST change the yellow and white cables in the Hornet connector compared to the BLTouch connector.
Marlin compiling process
I strongly suggest you check the following YouTube videos if you have any questions about how to compile Marlin yourself:
- BLtouch for any 3D printer - Comprehensive step by step guide
- Updated Marlin firmware setup guide - VS Code and Auto Build Marlin
Do not forget to support my work. Buy me a coffee