Tool to level X-axis of Prusa i3 (8mm rods)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Thing is a modified version of mangtronix'sX/Z leveling tool
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 531
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Thing is a modified version of mangtronix'sX/Z leveling tool.
I imported the model into blender, cleaned up most of the triangulated faces, then re-cut both the "claw" and the "L" to be suitable for 8mm smooth rods. The new cuts have a 4.2 mm radius (so 8.4mm diameter), and a fairly high poly count for extra-smooth curves.
I beveled the edges of the "claw" to account for the usual flaring that happens on bottom surfaces, so that such flaring can't affect the claw's effective diameter. I also beveled the upward-facing edges of the "L" to account for potential, minor edge artifacts that could distort that end of the part.
Print instructions
Licence: Creative Commons - Attribution - Share Alike Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: Prusa Clone
Rafts: No
Supports: No
Resolution: 0.1 mm
Infill: 15%