Wabeco 3-Spoke Hub
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter for the Wabeco drill stand to create a 3-spoke hub using the original mount.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 528
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Wabeco 3-Spoke Hub:
I created a 3-Spoke Hub for my Wabeco drill stand with the aim to use the original 25 mm mount of the standard feed lever. The part where the spokes are sitting is 50mm in diameter and the spokes themselves are 13,2mm.
All sizes can be adjusted easily in the Fusion 360 file by using the parameter change function. I added two user-parameters: spoke and knob.
I locked the hub with an M10x50 screw and a nut in the original drill of the feed lever. All parts (spokes and knobs) are glued with 2 parts resin glue.
my print-settings:
- PETG
- 25% infill
- standard 2 perimeters ( increase for more strength)
- with supports
enjoy!