1 / 5
Remix: GoBo projector for Bowens mount and m42 lenses. Uses Godox GoBo's. — zdjęcie 1
1 / 5

Remix: GoBo projector for Bowens mount and m42 lenses. Uses Godox GoBo's.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Please see original creators post. All credits and efforts are his! Main difference, this one accepts 66mm Godox GoBo's

Ocena
5 / 5
Polubienia
46
Pobrania
354
Wydruki
3
Wyświetlenia
1974
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

All credits go to original creator! I used alu tape to get a little bit more light out of the device as advised by original creator. Printed in PETG (gray) except the GoBo holder (PLA, black). Supports only used where the nuts go to support the bridge. Closed the hole (1 layer) to improve bridging. Just use a drill here.

 

Many Thanks to original Creator!

 

UPDATE 1: On request uploaded a FrameExtenderGODOX_TEST.  This should fit the original GODOX holder. This is still being fitted by another user and I'm waiting on feedback. Focal plane will not be correct > on the to do list. 

 

UPDATE 2: I've myself printed many gobo holders and placed a lot of gobo onto them for easy swapping (using a very small piece of double sided tape) > Creating a storage issue… Uploaded a solution for this. GoboCase.stl & GoboCaseCover.stl. Somewhat oversized! I wanted to use foam (one sticky side) inside for protection.

I've added some pictures of the projector in action. Unfortunately, lost the pictures of the case in action…