Touchmix 16 Trim Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for use with the QSC Touchmix 16 mixer. It sits over the trim pots to protect them from getting accidentally…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is for use with the QSC Touchmix 16 mixer. It sits over the trim pots to protect them from getting accidentally bumped during setup/tear down or operation. The level is still visible but the top of the pots is recessed below the protector so they are unlikely to get accidentally turned. It can be lifted right off when needed. It also fits in the case while attached to the mixer so really the only time it needs to be removed is when tweaking - and you can probably do that with it on by using a fingertip.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament: Generic PLA Green silk
Category: Electronics