Pistol Magazine Belt Holster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holster for your hand gun magazines for days on the range
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 994
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
A holster for your handgun magazines, I modeled this one after one I bought.
Print it upside down (opening on the build plate) will need some supports for the belt loops so I'd recommend tree supports, block supports from printing at the top, it should be able to print the over hang.
I did 4 walls, 50% Gyroid infill, and made it with ABS.
I imagine PETG would work along with PLA+ or PLA Pro. I did 1 ABS and the other with PLA Pro.
NOTE
I designed it a little oversized so the Mag are a little loose, I noticed after Vapor Smoothing the ABS one fits tighter.
And for the PLA one i used my heat gun to form it to my MAG.
So adjust scale or post process to have it fit tighter if you want that.