Race Track for Flicking Disks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the idea of the game "pitchcar", this is a race track to find out how is the best in flicking disks
- Ocena
- 5 / 5
- Polubienia
- 110
- Pobrania
- 395
- Wydruki
- 2
- Wyświetlenia
- 3181
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Update March 16th 2024:
Added Fusion360 files, to make it easier to create your own tracks
Print instruction
Print parts upside down with 0 solid top layers to save material.
The track surface will adopt the print bed surface. Use textured sheet if available.
Put guarding rails for curves in place and use soldering iron, 3D printing pen, or glue to combine parts. Picture shows how I used a 3D printing pen on the outside.
Additional parts:
While discs can be printed, best sliding characteristics can be achieved by wooden discs (like from Crokinole or Carrom).
Files for stickers are in the files section.
Setup
Print as may parts as you like and build your favorite race track.
Available parts:
- straight
- curve 90°
- curve 45°
- constriction
- jump
Every player selects a disc ("car")
Warmup
To learn the track each player flicks his disc from a start line full lap till crosses the start line again. Count the number of flicks.
If the disc leaves the track, retry from the last flicking position.
Main race
In order each player makes a flick.
The player who finishes a set number of laps first, is the winner.
If your disc get flicked off the track, you put in in the place where it left the track when it is your turn.
Variant
For a more strategic variant, you flick twice when its your turn.
Optional catch up mechanic
If you are at the last position at the start of your turn, you do an additional flick.