Snapmaker J1 Magnetic Bowden Coupler (6x3mm magnets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Bowden Coupler For Snapmaker J1 with 6x3 mm magnets
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 565
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to use @3DInk_878748's coupler but did not have the magnets in the size he chose.
It allows you to use the standard PC4-01 M10 bowden couplers for 4 mm bowden tubes (to connect it to a dryer) and the original 4.4 mm reverse bowden tubes from the Snapmaker J1. The second uses a two-part design that screws and tightens the bowden tube this way.
This version is designed for magnets with a diameter of 6 mm and a thickness of 3 mm.
If you have already changed the J1's inner bowden tube to a standard 4mm one, ignore this file and use the parametric one from @LineArcLine at this link
https://www.printables.com/model/32368-join-ptfe-tubes-together-magnetically