Sentro (48 needle) - upper yarn guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement of the upper yarn guide of the "SENTRO 48 Needles Knitting Machine"
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 164
- Wydruki
- 0
- Wyświetlenia
- 1102
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement of the upper yarn guide of the “SENTRO 48 Needles Knitting Machine”
When using mine with a drill adaptor the yarn quickly cut into the original guide which made it useless as the needles did not catch the yarn anymore.
Printing
The replacement part prints without supports in the shown orientation (45 degree). Feel free to modify it if it does not fit your machine. I provide an STL, STEP and the Onshape Link to the model.
Onshape Link: https://cad.onshape.com/documents/1f55a9998e1a9b6d615a00f1/w/547cff12d3471c42aed06a9b/e/95509cf3e86a2ec79713b8fb
Assembly
To remove the original part you need to remove the seven screws shown in the picture:
Then you can unscrew the original part.
I did not screw in the replacement but instead glued it in place with some hot glue. This makes future replacements easier.
Like the model? Consider saying thank you by buying me a coffee: