Organizer for kitchensink / Behälter für Küchenspüle - (for 235x235 Printbed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A container to place between kitchensink and wall for soap, brushes, sponges or whatever you want to put in.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 323
- Wydruki
- 0
- Wyświetlenia
- 1203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
These are two containers to place between kitchensink and wall for soap, brushes, sponges or whatever you want to put in. They are specialy made because my printbed (235x235) was to small for the other containers i found, so i just jumped into fusion360 and made these.
Originially i added a geometry to join the two pieces, but it didn't work as expected so i removed them before i uploaded the models here. Feel free to edit, STEPs are also uploaded. I just glued them together.
The height of the overhang is 5 mm (4,8 mm would have been enaugh in my case).
Space between wall and the edge of the kitchensink is 47 mm.
The angles of the bases are different. 4° for the “high” one and 2° for the “flat” one (since i wanted the soap stand more upright).
Printed with grey PLA+
Support is needed for the overhang.