NZ Bayonet Adaptor for Moon Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bayonet adaptor for the popular moon lamp model. This model suits a standard NZ bayonet fitting.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 265
- Wydruki
- 3
- Wyświetlenia
- 1347
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
This a new design for a bayonet adaptor for the designer moon lithophane lamp model.
I wasn't happy with the provided ceiling adaptor STLs as they didn't fit the standard NZ bayonet fitting (Too thick, so there was not enough thread to secure the fitting). So I created my own. This model is not taken from the original STLs as I was unable to convert them cleanly and easily so I simply redrew from scratch.
Although this model is not a remix, I have flagged it as such as so you can easily locate the lamp model itself (Since you will still need it).
This will fit any NZ standard bayonet fitting comfortably. The fitting has a slight friction fit into the Moon, but has stops to prevent you from over turning it too much. If your print is too tight, you can sand the tabs slightly thinner.
I have included a photo of the prototypes I modelled along the way.
I have also included the Fusion360 file so you can modify it to suit any other fitting as required.