eSun eBox Wide Tray Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade your filament drying experience with this must-have modification! 🌟
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 368
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Excited to share the upgraded "eSun eBox Wide Tray Mod"! Initially crafted in PETG, this design proved its worth by enhancing the eBox's capacity for wider spools up to 83mm. 🛠
After years of use, I've fine-tuned the design, improving the locking mechanism for even better stability and performance. While ABS is my go-to for its heat resistance, making it perfect for all the eBox's temperatures, this mod works great in PETG too. Just a heads-up, I wouldn’t recommend PLA due to its lower thermal resistance.
No extra parts, supports or glue required!
All my designs are protected by Copyright Law. Purchasing does not grant the right to sell any digital file or printed model of my designs without explicit consent. Please respect the hard work of 3D artists by never sharing or selling digital files.
See all my designs on cults:
https://cults3d.com/en/users/jajaum3d/creations
3D Printing Settings:
- File Format: STL, ready for printing without any supports.
- Pre-Oriented: Files come pre-oriented for optimal results.
- Recommended Settings: 0.2mm layer height, 5 walls, and lightning infill for the showcased prints.
- Tip: Use Brim for the locks.
- ABS Adjustment: If using ABS, consider scaling up by 1% due to filament properties, but adjust as needed for your specific material.