1 / 5
Tesla Model 3 / Y Backlit Modular Tray Remix - Longer & Rear Cutouts + Options
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to have slotted rear with optional light diffuser - model is also 10mm longer.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 1284
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (1)Kolekcje (52)Powiązane
Great original model - but I wanted to remix slightly to open up use-cases to wider application. The idea of a clear back to utilize the light in the console is brilliant - but I typically don't use PLA for automotive applications or where temperatures can be very high. Clear PETG is great but I typically don't like the final (glossy) appearance - so ASA is usually my go-to for car parts. Since there's no clear ASA, I remixed this model by:
- Making slots in the rear of the tray - this would allow printing without use of clear filament at all. Light from console would simply shine through the slots. I've also filleted the slots to help with strength.
- I provided a back cover that can be printed in clear PETG. This cover can then be superglued to the rear of the tray but act as a diffuser. This way light can still come through to the tray but you cannot see through the slots.
- Finally, I also made the tray 10mm longer - I felt the original was a little short compared to other trays I've seen/used