1 / 3
Große Steinhöhle Fischhöhle für Aquarium Big stone cave fish cave for aquarium
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
große Steinhöhle mit vielen Löchern big stone cave with many holes
- Ocena
- 4,8 / 5
- Polubienia
- 498
- Pobrania
- 2709
- Wydruki
- 10
- Wyświetlenia
- 8147
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 10) (Komentarze: 12)Remiksy (0)Kolekcje (629)Powiązane
Allgemeines
Meine Mutter wollte ein wenig Deko für ihr Aquarium haben und es sollte eine Steinhöhle werden.
Druckeinstellungen
- Drucker: BambuLab P1s , X1C oder P1P
- Schichthöhe: 0,2mm
- Infill: 20-25% Gyroid → für mehr Masse
- Vertikale Perimeter: 4
- Decke- & Boden Schichten: 4
- Stützstrukturen: ggf. notwendig
- skalierbar: nicht getestet
Material
- getestet in PLA
- auf dem Bild:
- Sunlu PLA+ Grey
- auf dem Bild:
General
My mother wants a big stone cave for her aquarium.
Print Settings
- Printer: BambuLab P1s , X1C oder P1P
- Layerheight: 0,20mm
- Infill: 20-25% gyroid → for more mass
- Vertical Perimeter: 4
- Top- & Bottomlayer: 4
- Supports: maybe necessary
- scalable: not tested
Material
- tested in PLA
- on the picture:
- Sunlu PLA Grey
- on the picture: