1 / 5
horizontal diswasher sign
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
horizontal diswasher sign
- Ocena
- 4 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 114
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just another boring diswasher sign, with one great advantage.
It is horizontal so you can check it from above, you don't have to bow/kneel before the machine :)
If DIRTY then you can pack in your plates and utensils.
As soon as you start the machine flip it to CLEAN, signaling that after the washing everything is cleaned.
If the washing cycle is ready unpack everything and flip it back to DIRTY.
Tools needed:
- Superglue
- 3 pieces of magnet (8mm diameter, 3mm thick). My cheap ones were closer to 2.5mm than 3mm. If you are in doubt just print the smallest slider part, and check it.
- Colored alcoholic pen
Instructions:
- Printed with 0.2 layer height with supports, for orientation check my picture from Cura
- Check the slider if its not moving freely sand it a bit.
- Color the texts on the base with the alcoholic pens.
- Superglue a magnet into the sliders hole
- Put the slider on the base and glue the backplate on.
Watch out for not glueing the slider to the back! - Glue two magnets to the backplate.
Watch out for polarity, the slider has to be attracted to these magnets!