Xp-Pen artist pro 16 drawing tablet VESA mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to use the drawing tablet as a secondary monitor if not used for drawing, allowing easy removal.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
The main goal was to be able to use the above mentioned pen tablet as a secondary monitor when not used for drawing, but still be able to remove it easily from the VESA (100x100mm) mount when necessary, by flipping up the two side locks approx 180 degrees.
Necessary hardware: M3 heat set inserts: 6 pcs, M3x10 screws 4 pcs, M3x15 or 20 screws 2 pcs, M5 heat set inserts 4 pcs, M5x20 screws 4 pcs (better with M5x15 screws, but I had those on hand so the spacers were necessary). If You wish to use different hardware STEP and F360 files are included for easier remix.
The parts are divided into smaller pieces to be able to use a 220x220mm print bed, supports are necessary only on the center piece, printed from PETG.