1 / 7

Allsky Camera Housing for Raspberry Pi (Free Version)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło: Printables
Kategoria: Photo & Video
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Wydruki i komentarze Remiksy Kolekcje

Update Feb-26 - V3 Available to download in the my Printables Store

Update Nov-24 - Version2 for PI and ZWO Cameras available in my Printables Store:

The V2 offers an improved dome design with ventilation and heating, including additional custom power and installation options. I've found the ventilated versions to be 100% effective against dew in both summer and winter months. The original V1 (here) remains free, but depending on your climate, you may wish to upgrade. All dome versions are fully interchangeable with the same Tubs & Bases.

Please check the printables article regarding unventilated dome performance

Prusa Referral Program: Need to upgrade your Printer? Referral Links🔗 for an extra 1kg *PETG Urban Grey at checkout* with the purchase of a Prusa Core1 / L / XL. T&Cs apply.

The original Allsky V1 (2023)

Allsky Camera Housing with USB Dew Heater & Roof Mounting Base

Inspired by the Thomas Jacquin concept i created my own budget Allsky Camera

Follow the external community link to find out more about Allsky

Printed in a combination of PETG/ASA and TPU with 0.4 / 0.6 Nozzle.

The main body can be printed without infill and min 4 outer-layers to provide thermal isolation during summer/winter

Dew Heater

After 2-3 months of experience in Cold Weather (-5C) Resistance Heating is required to limit dew build-up inside the dome. I detail below a cheap solution using the 5V supply from the raspberry Pi USB Ports; all running over single POE+ Cable. Heating can be optional for dryer climates.

StarTrail without Heating - (dew visible on right hand side of dome)