Hedgehog
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another pom pom baby. Get out your yarn!
- Ocena
- 5 / 5
- Polubienia
- 406
- Pobrania
- 1133
- Wydruki
- 11
- Wyświetlenia
- 6642
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
A no-support necessary model of a little hedgehog. All it needs is a fluff ball of some kind - yarn or fur pompoms are perfect. Print size at 100% is about 50mm/2 in. Can be scaled up or down. The smallest I've printed is less than half that.
*Hedgehogs pictured are painted with paint markers and resin gloss with a yarn puff
Printed on Ender 3 V2 in PLA
Layer height: 0.2 for 100%, 0.1 for smaller
Supports: no
Bed adhesion: skirt/none
Infill: recommend at least 10%
Make sure you have good cooling, if not, the overhangs on the feet can get a little blobby
**Update: 2-12-2024
There was an issue with the eyes that is hopefully fixed now
**Update: 2-16-2024
It wasn't fixed. Hopefully now it is! Added a round eye and flat eye version
Please tag me if you make them, I love to see!