Charizard Art
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cute wall or stand mounted 2.5D model of the Pokémon Charizard.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 180
- Wydruki
- 2
- Wyświetlenia
- 1186
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
THIS IS NOT MY ORIGINAL ART! I simply took this art and changed it into a 3d-printable format. Please visit the post I got this from at:
https://pokemon.fandom.com/wiki/Charizard?file=006Charizard_Dream_3.png .
It has a width of 2.95 millimeters, so it can fit into my 3mm stand. I recommend slowing down your printer's speed to around 100mm/s to avoid stringing and to get an all around nicer look. Additionally, a 0.4 mm nozzle will work on 0.2 layer height, but for best results use a 0.2 mm nozzle and 0.1 mm layer height. Brims are highly recommended for bed adhesion. If you want it to be larger at all, only adjust the XY size so it keeps the same thickness. If the tolerances are too loose or tight, then adjust the Z height of this model. To have it free-standing, use this model I made
https://www.printables.com/model/748697-vertical-art-display-stand
or use some adhesive to mount it to your wall! If you think it looks good, post a make and a review!😊
Designed specially so that everything is one solid piece.
Made with ❤ from Canada