4 Gang Electrical Box Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basically encloses a 4-gang internal 'new work' electrical box to make it portable for electronic projects
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 867
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple box used to enclose a 4-gang ‘new work’ electrical box.
The purpose of this is for hobby projects that need a safe high voltage box to contain wires/connections.
I used this for a Raspberry Pi project. The project was coding a grow tent controller which triggers the outlets on and off when needed. So this for me made a smart ‘power strip’ if you will.
But this can be used for any hobbyist project that requires a 4 gang box.
The 4-gang box was secured simply by using a bunch of hot glue but you can also use any general adhesive since it's not coming in contact with electrical wires or components.
Print Settings
- Printer Brand: Creality
- Printer: Ender-3 v2 Neo
- Rafts: No
- Supports: Yes (for the power cord hole)
- Resolution: .2 mm
- Infill: 20%
- Filament brand: Hatchbox
- Filament material: PLA