Frame Top Bar upgrade for CABBY Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade to provide a possibility for additional magnets on the front doors, at the top of the doors.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 352
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Upgrade for CABBY enclosure: https://www.printables.com/model/585697-cabby-enclosure-for-original-prusa-xl
Upgrade to provide a possibility for additional magnets on the front doors, at the top of the doors. This is by no means a necessary upgrade, but a personal preference you might share.
If you have the original CABBY enclosure already finished, then you need to:
- Replace the original Frame_Top_Bar with the Frame_Top_Bar_upgrade
- Drill additional holes on the top of the doors
- Mount the door screwcovers in place
Needed hardware, additionally to original CABBY enclosure:
- 1x Frame_Top_Bar_upgrade (see files in this model)
- 2x Door_Bottom_Screwcover (see files in this model)
- 2x Door_Bottom_Inner_Screwcover (see files in this model)
- 2x Socket head cap screw M6x12 with 9mm/10mm head ⌀
- 2x Low profile square nuts !magnetic! M6 10mm x 2mm (DIN 562)
If you DO NOT YET have the original CABBY enclosure already finished, then you can omit printing the original Frame_Top_Bar and directly print the one provided here.
Additional info:
- Available files for 9mm screw head or with 10mm screw head (which is more typical one according to DIN912 or ISO4762)