Height adjustable screw foot with sockets for furniture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple adjustable screw foot for leveling furniture. Two lengths are available.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 370
- Wydruki
- 1
- Wyświetlenia
- 1494
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
This simple design allows the proper leveling of any piece of furniture with legs. Just print four sets of them and attach them to the base of each foot of, e.g., a table or shelf. Screw holes are available, but in most cases double sided tape should be enough. The major force on the part is through compression.
I added a second version which is much shorter. This is useful if your floor is pretty much level already.
Details:
- Screw socket base measures: 30mm x 30mm
- Thread type: ISO M20x5 (metric)
- Minimum height: 35mm (long), 23mm (short)
- Maximum height: whatever you feel save with. I wouldn't go beyond 45mm for the long and 30mm for the short version
My print settings:
- PLA is ok. Print in PETG for more strength.
- 0.4mm nozzle (0.6mm works as well)
- layer height: 0.2mm (0.3mm with 0.6mm nozzle)
- Infill: 50%
- 3 perimeters (2 with 0.6mm nozzle)
- 4 solid base and top layers.
Needless to say, but adjusting the print settings/material for enough strength according to your use case is your own responsibility. Don't blame me if the design fails and your 2000 Euro/Dollar TV breaks to pieces on the floor ;)
Onshape link (long version), Onshape link (short version).