1 / 2
Clip Buckles for 1.5 inch webbing / DLX Twinpeak Waist Belt — zdjęcie 1
1 / 2

Clip Buckles for 1.5 inch webbing / DLX Twinpeak Waist Belt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip buckles compatible with the ones on a DLX Twinpeak backpack waist strap, or for use on any 1.5" webbing strap.

Ocena
5 / 5
Polubienia
49
Pobrania
514
Wydruki
4
Wyświetlenia
1338
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Male and female buckles compatible with the belt strap buckles on a DLX Twinpeak backpack. Useful if you broke one, or need an extension strap to make it fit.

They also work fine with any 1.5" webbing straps.

Print the female part upright, and enable support material - I suggest Organic. You may have to play around with the support a little.

The male part should be printed flat, and will also need support, but probably doesn't require organic.

Print in PETG, ASA, or ABS (ASA might be tricky, there's a balance between cooling fan for quality vs no cooling fan for strength.)

Tagi