SLA Resin Bottle Steady Frame + Sleeves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple frame to place your SLA resin bottle into while pouring unused resin back into it. Intended to prevent spills.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 139
- Wydruki
- 5
- Wyświetlenia
- 639
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
When you are pouring unused photopolymer resin from your build tank back into the bottle it pays to keep your bottle upright because resin spills are both costly and nasty to clean up.
Since I don't have two sets of hands I designed this simple frame to help keep my resin bottles steady while I do this to reduce likelihood of spills.
The frame has an internal diameter of 95mm which will easily accept a Voxelab 1000g bottle of photopolymer.
I have also provided two sleeve's for bottles of smaller diameter. One to center the bottle in the base of the frame, and another to center it in the top of the frame. No STLs are provided for these as you can edit the f3d/3mf files to suit the diameter of your bottle.
An example sleeve is shown.