Ultimate 64 - Tape to User Port Adapter (legacy)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter that "converts" the Tape port into a Userport for use with the Ultimate 64 Userport expansion
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 880
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
WARNING: NOT FOR ELITE 2 / C64 Ultimate
This design is meant for the original User port adapter (green PCB) for the Utimate 64. You can find the updated version for the C64U and Ultimate Elite II, here:
https://www.printables.com/model/1553507-c64-ultimate-elite-2-tape-to-user-port-adapter-202
Or the other one that allows access to the tape port, here:
https://www.printables.com/model/1567413-c64-ultimate-elite-2-user-port-combo-adapter-2026
==========================================================================
Enclosure for the Ultimate 64 Userport expansion that attaches to the Tape port.
I also made a version that allow for access to the Tape Port: https://www.printables.com/model/752267-ultimate-64-user-port-combo-adapter
Print Settings:
Layer height: 0.2 mm
Perimeters: 3
Support: Only some support on the front of the Userport base. (I used ‘paint on support’ + organic support)
Additional hardware required:
None. Everything just snaps together.
Assembly Instructions:
Insert Userport Adapter and press down. Make sure it's flush with the bottom.
Guide the ribbon cable through the Tape connector opening.
(Make sure that the Tab on the connector aligns with the opening on the Userport connector) Insert the connector
Attach the top cover. Make sure it is aligned correctly on all sides before applying force to press it down
Insert the support leg on the bottom
Attach the whole assembly to the Tape connector.
