Dart Zone Max Dictator Magazine Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 30 round magazine extender for the Dart Zone Max Dictator to fully utilize the space within the blaster.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 106
- Wydruki
- 1
- Wyświetlenia
- 1267
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a modification to the magazines for the Dart Zone Max Dictator to turn the single flip magazine into two 30 round magazines. It uses a singe 12 round Dictator specific magazine and a Out Of Darts Tachi Magazine Spring, which they sell separately. I would also recommend a drop of lubricant on the contact points, but that isn't required for it to function.
I would highly recommend printing the vertical variant rather than the 2 halves for durability and reliability. To do so, I used my Bambu Labs P1P, and a similar style printer would be necessary for the build volume and the non-moving bed for quality.
If you do not have access to that type of printer, the two halves still work fine in my testing. You will have to glue around the seam to hold them together, and they should be reasonably secure. It will fit on any Ender 3 size bed or larger (220X 220Y).
Once assembled, it should work perfectly from the get go, and it can at minimum support the 7.5 darts per second of the Dart Zone Max Omnia Pro, but it is specifically designed for the Dictator, so you should have no problems whatsoever.