Electric Fence Insulators
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are a few insulators I have made for my pasture fencing.
- Ocena
- 4 / 5
- Polubienia
- 16
- Pobrania
- 229
- Wydruki
- 1
- Wyświetlenia
- 967
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
The stls should load in the correct orientation and require no supports. I suggest printing with no cooling fan for best layer bonding. I included the step and fusion files so you can modify for your needs.
Insulators like this are easy and cheap to buy but for the round pipe I needed something custom and I made a few screw on wood post ones just so I got the length I wanted.
These have been in use since before 2020 and none have failed.
I printed all of these out of nylon trimmer line. This makes extremely strong and tough parts. I bought round .065" blue trimmer line from MaxPower on Amazon. I have printed a lot with this stuff and it makes very strong parts, though it is prone to warp like most nylon so large parts are difficult. And I make sure to dehydrate the nylon before and during printing.