1 / 11
Prusa MMU2 moving Filament passage 22mm IKEA PLATSA
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I want to reduce the Weight on the MK3's Frame and have a shorter Way for the PTFE-Tubes before the MMU Unit.
- Ocena
- 5 / 5
- Polubienia
- 91
- Pobrania
- 434
- Wydruki
- 5
- Wyświetlenia
- 6131
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 5) (Komentarze: 25)Remiksy (2)Kolekcje (320)Powiązane
I want to reduce the Weight on the MK3's Frame and have a shorter Way for the PTFE-Tubes before the MMU Unit.
The MMU moves into the upper shelf of my IKEA PLATSA Enclosure. To got the Filament down to the Printer i've designed that Print.
You need:
2x M4x30 countersunk screws
4x M4x30 screws
6x M4 Nut
longer PTFE Tube dependent to your enclosure
Todo: Cable management ;-)
Update 02.08.2020: added 50mm Version for LACK Enclosures (not tested) !