Designer Lithophane Moon Lamp STL FIXED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the amazing moon lamp by Frank Deschner, with the STL bug fixed.
- Ocena
- 4,917 / 5
- Polubienia
- 287
- Pobrania
- 2734
- Wydruki
- 14
- Wyświetlenia
- 14 307
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the amazing moon lamp by Frank Deschner, with the STL bug fixed.
It prints flawlessy as the original, but you don't have to worry about the nasty layer messing up with your printer and fan, in case you slice it with anything other than prusa slicer (e.g. Cura, s3d etc.).
All I did was to import it with meshmixer and fixed it with the default repair settings, and export it (now it takes about 250mb, I didn't dare to reduce it)
I tested it with s3d, 0.15 layer height, 2 outline perimeter, 7 top layers, 5 bottom layers, printed in white PLA on a mk2s (Caribou 420 mod)