Aquaponics setup for Aqueon 72 bow front
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Components for adding an aquaponics setup to an aquarium, great for growing a variety of plants.
- Ocena
- 0 / 5
- Polubienia
- 60
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 1444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
A variety of components for adding a simple aquaponics setup to an aquarium, this was modeled for an Aqueon 72-gallon bow front but could probably be adjusted to a variety of aquariums. I've had success growing basil, lettuce, and parsley, mostly shorter varieties of plans because the lamp is held fairly low so it can benefit the fish in the tank as well.
The components are fairly simple to print, the only components that required any supports are the rear holder parts. and the tube fitting and output on the Hose Connector. The rear holder parts were printed in PETG for a bit more strength as they have to hold quite a bit of weight, the rest were all printed in PLA.
These components replace the middle pane of glass in the hinged aquarium top, but still make use of the front pane of glass that came with the aquarium.
It's like having a small indoor garden on top of the fish tank and the produce are delicious.