1 / 6
Leica GPR121 surveying prism rain cover — zdjęcie 1
1 / 6

Leica GPR121 surveying prism rain cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Water and lasers don't mix too well, so here's a rain cover for the Leica GPR121 prism!

Ocena
0 / 5
Polubienia
5
Pobrania
92
Wydruki
0
Wyświetlenia
775
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This rain cover fits the Leica GPR121 prism; for a version compatible with the more common GPR1/GPH1 (and its many copies), see my other model.

The rain cover attaches to the prism by clipping around the vertical pivot connectors, making it easy to put on and take off. The bottom part of the clip is reinforced to avoid breakage. The top has cutouts for the sight and target shield. 

I print this model with the rear down with a raft and conventional support. Be sure to use a durable filament!

If using with the target shield, please note:  the rain cover can only be installed or removed with the shield off. This is really intended to be used without the shield, but if there's interest an improved version that can be made that resolves this issue.

Tagi