Backhoe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small articulating backhoe The parts are designed to move, and be printed without supports
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 317
- Wydruki
- 2
- Wyświetlenia
- 816
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
I'd love to see pictures of your prints!
The tolerances on this backhoe are such that if you want the parts to move you need to print it with a small nozzle at 1 mm layer height, or scale up the model.
This model is designed to be printed without supports and On a raft. high detail on a small nozzle .25mm is recommended
This model should fit right in with agepbiz's Tiny Wheels collection.
UPDATE: Per request, I have added a backhoe model with tighter tolerances. It is untested, but will probably work better if you intend to upscale.
The repaired version has a messier-looking mesh, but it was run through Mesh mixer to make sure it's water-tight.