1 / 1
Half-frame sunglasses for Oakley Garage Rock Lenses — zdjęcie 1

Half-frame sunglasses for Oakley Garage Rock Lenses

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple frame for Oakley's Garage Rock lenses.

Ocena
0 / 5
Polubienia
4
Pobrania
124
Wydruki
0
Wyświetlenia
656
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This sunglasses frame is a fast and easy print. It is compatible with Oakley Garage Rock lenses. The lenses are simply clicked into the frame- no glue required.

Printing Instructions

Print upside down without any supports. I printed with 0.4mm nozzle and 0.15 mm layer hight to reduce effords for post processing. However, I recommend to sand down the printed frame a bit. 

Slow down print speed for the fragile pins holding the lenses (option "Slow down if layer print time is below")

The temples may be critical parts, which tend to lift off the print bed if the first layer is not properly adjusted. I recommend to enable the slicer option “Avoid crossing perimeters”.

Tagi