Raspberry Pi Squeezebox case V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Raspberry Pi PiCorePlayer based Squeezebox and display.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Case designed to fit a Raspberry Pi, touch screen display and speakers.
This is the display I have used https://www.amazon.co.uk/gp/product/B07KJBCNS8/
The speakers - https://shop.pimoroni.com/products/5w-4-ohm-65mm-full-range-speaker
Speaker Bonnet - https://www.adafruit.com/product/3346
Buttons - https://thepihut.com/products/180-piece-ultimate-tactile-button-kit
Button caps - https://thepihut.com/products/black-soft-caps-for-tactile-buttons-1-pack
IR receiver - https://thepihut.com/products/ir-infrared-receiver-tsop38238
Light sensor - https://www.adafruit.com/product/4681
The light sensor can be used with or without the QT-QWIIC connectors.
All items printed at 0.2mm layer height with a 0.4mm nozzle. No supports
8 off M3 countersink screws are required to screw the case together.
8 off M4 countersink screws and nuts are required to mount the speakers.
M2.5 screws to mount light sensor and button PCB.