1 / 4
Printable Palazzo Ducale (Doge's Palace) and Basilica San Marco
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy printable Palazzo Ducale (Doge's Palace) from Venice, Italy
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 357
- Wydruki
- 3
- Wyświetlenia
- 1198
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (50)Powiązane
An easy printable model of Palazzo Ducale (Doge's Palace) and Basilica San Marco from Venice, Italy.
“The palace was the residence of the Doge of Venice, the supreme authority of the former Republic of Venice. It was built in 1340 and extended and modified in the following centuries”
There's a lot of fine detail here, I perhaps went a bit overboard but it prints very well!
Prints well on the Prusa MK4 - no supports required! - Lay the model on the base as expected :)
0.4mm Nozzle 0.2 layer height with Input shaping
Prusament PLA