PrintDry Pro Spool Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For spools with unusual diameters, such as the large Sunlu spools with 70 mm inner diameter (ID). New: 50 mm ID spools
- Ocena
- 4,667 / 5
- Polubienia
- 13
- Pobrania
- 96
- Wydruki
- 6
- Wyświetlenia
- 735
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I like my PrintDry Pro filament dryer, but the spool adapters that came with it didn't fit Sunlu filament spools, which have an inner diameter of about 70 to 72 mm.
UPDATE 2/16/2022: I was asked if I could create an adapter for 50mm ID spools; here it is. I have NOT personally tested it.
In addition to the adapter, you also need to print a bushing that slides into the inner hole of the adapter.
I printed the bushing in ABS and the actual adapter in TPU.
0.3mm layer height, 3 perimeters, 15% infill.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.