Book box for a Hardcover (glue in)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you recover or bind books, you may have mismeasured once or twice. Don't let hard work go to waste!
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
If you recover or bind books, you may have mismeasured once or twice. This was an effort to salvage the hard work that was put into a newly crafted cover that was dimensionally incorrect.
The model does scale up well, but if you need to scale down, I suggest re-slicing it and increasing the wall thickness to 3 layers, as it may become too thin to be sturdy/stable for use. The lid does have a 2-degree chamfer on the inner lip to allow for easy and consistent opening and closing.
The pictured image was printed in natural PETG and has a Dark Walnut wash over it to give it the appearance of gilded pages, as the stain likes to set between the horizontal layers. It was adhered to the cover with CA glue, allowing 10mm of clear space to the edge.
gcode- The total assembled dimensions are: Length: 207mm, Width: 140mm, Height: 34.5mm.
Please feel free to comment if there are any improvements you would like to see. I would like to eventually make several variations of this (compartments/holders/slots etc.)
Our day-to-day error have been a hidden opportunity to make something out of the mess. As long as we keep learning, there will definitely be more prints to come, lol.