Moss Pole_V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular moss pole for monstera / philodendrons etc to climb
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 468
- Wydruki
- 3
- Wyświetlenia
- 4781
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modular moss pole for monstera / philodendrons etc to climb. I created this as an adaptive modular pole that can be increased in height as the plant develops. Each 200mm high elliptical helix (56x42mm). The base option has M3 fixing options - 2No is more than adequate. The incremental pole sections are press fit. I have created a feeder hole for fine fishing line to further secure increments. Suggest above 3 high a small dowel or similar is used internally to ensure integrity. Thus far finding these very robust.
Printed @ 0.2mm speed with PETG is my preference on the smooth build plate for good adhesion during print. No need for any skirt or brim with this plate. Suggest acetone clean first. No supports required.