1 / 7
Salt shaker, logo of Pass The SALT 2018 — zdjęcie 1
1 / 7

Salt shaker, logo of Pass The SALT 2018

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Salt shaker, fully functional :) Based on the Pass the SALT 2018 conference logo.

Ocena
0 / 5
Polubienia
3
Pobrania
46
Wydruki
0
Wyświetlenia
294
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Salt shaker, fully functional :)
Based on the Pass the SALT 2018 conference logo.

It can be printed with or without pedestal.

Openscad source code provided.

Thanks to @cryptax for the idea :)

 

Notes: 

No support needed for the body.
Supports needed for the head.

Beware it's hard to remove supports from the head_hollow version, that's why I made the other one with a conic hole.

Once it's printed, you may find hard to screw the head exactly in place (which is important to get aligned with the pedestal text).
The provided STL have a 60º compensation (see rotate_head in the code), you may have to adjust.

One trick is to use a hot air gun to soften a bit the head thread before screwing it, then it fits nicely without need for compensation.

Tagi