KitchenAid Stand Mixer attachment hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attachment hanger for kitchenaid stand mixer
- Ocena
- 4,875 / 5
- Polubienia
- 3528
- Pobrania
- 6045
- Wydruki
- 71
- Wyświetlenia
- 36 366
- Oceny
- 72
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I put together this hanger to have a place to store all of the attachments for our KitchenAid stand mixer. The pieces press-fit together... I secured mine to our cabinets using 3M double-stick tape, which serves two purposes... keeping the 'posts' in whichever orientation you choose, and eliminating the need to screw them into your cabinets.
There are three 'base' options included, 200, 225 and 250mm (the one shown in the image is the 200mm version, which is a little tight.
Edit: I've added variations of each of the bases which include 4mm through-holes to give the option of mounting with screws instead of tape.
Edit2: Per request, I've added 4 and 5 tool variations (currently with only one spacing option of 90mm tool separation). Both of these have options with and without screw holes.