1 / 5
Voron Stealthburner CW2 EBB36 CANBUS Backpack + Cable Chains
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to attach EBB36 to Stealthburner CW2 printer carriage.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 162
- Wydruki
- 0
- Wyświetlenia
- 2016
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (28)Powiązane
This design allows the EBB36 CANBUS board to be used on Stealthburner with CW2 while retaining the X axis cable chains.
A few items of note:
- You must use the ‘PCB’ cable cover door on Stealthburner.
- The backpack bracket includes built-in break-away supports.
- The backpack bracket requires 7x m3 threaded inserts.
- The 2.5mm spacers should be installed between the EBB36 and backpack bracket.
- The ‘left’ arm of the bracket attaches to CW2's PCB bracket attach points.
- The ‘left’ arm should not be affixed until the EBB36 is installed into the bracket, as it must be flexed slightly to get it into place and that is not possible once both arms are affixed.
- The cable chain can be removed from the bracket to reveal the EBB36 USB C port.
- The USB C cables that Samsung has recently been including with their phones and tablets will fit through this opening.