Windsor Karcher Vacuum Foot Pedal 86407870 86363180
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original part number: 86407870 or 86363180 These pedals allow the vacuum to stand/lock upright when not in use.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Original part number: 86407870 or 86363180
These pedals allow the vacuum to stand/lock upright when not in use or when being rolled. The original parts break or wear out pretty much 100% of the time, so this is a functional part to save you some money on a replacement. My part looks a little different, but it's designed to be tougher than the original and it fits nicely.
To replace: Simply remove the old part (there's a screw and pin holding it in place) and pull off the outer orange or yellow jacket and remove the torsion spring. Slide the spring into the printed part (it may need to be rammed in with a screwdriver) and replace the jacket.
PLA isn't tough enough for this; I've had better results with PETG.
