ES100 mk2 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case to protect buttons from accidentally pressed while tugged away in the bag/pocket
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Update: uploaded v13 for a tighter fit and more indent to hold it in place
This hard shell case solves a problem I got when packing the ES100 mk2 Bluetooth DAC into a stuffed bag - it always powers on out of nowhere and “steals” the audio source from my phone. Internal indents allows the player to shift around without activating any buttons.
In this configuration, the 3.5mm jack and charging port is exposed and usable. The back clip secures itself into this shell so that it won't fall off.
Designed to be printed with 0.4mm nozzle (0.44mm width). I made a few prints in both PETG and PLA - both very usable and the PETG will flex more especially with the 2 perimeter setup I am targeting.
Attached also the fusion360 files if you want to tinker with the dimensions.